Achieve professional-quality results with this simplified two-part painting system.Simpler to use then other two-part polyurethanes, Perfection has been formulated to enable "do-it-yourselfers"to achieve professional quality results with ease on topsides, superstructure and decks. Produces a finish withsuperb color and gloss retention and provides prolonged impact and abrasion protection-even on the highest wearareas. It is resistant to a wide range of chemicals, including fuels, mild acids and detergents. May be brushed,rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Not for use over one-part enamels.Key featuresReduces the gloss of perfection or perfection plusCan be applied to boat decks, spars, masts and on most surfacesReduces gloss level from high gloss to a satin finishSpecificationsBase Formulation: Two-part linear polyurethaneApplication: Brush, spray, roll & tipNumber of Coats Recommended:2-3Primer Needed: 404/414 Epoxy Primekote, Model 180570Drying Time: To touch; 2 hrs ;To recoat: 6-48 hrs.